HYCNC 1.25m 22*twenty five*671mm Cnc Router Equipment Rack PinionCZPTcal Tooth Cnc Equipment Rack Inexpensive Cost Manufacturing facility Directly Offer
The force angle is a parameter that decides the gear tooth profile. Equipment tooth area Inclination. The stress angle (α) is normally 20°. Prior to, the stress Gears with an angle of 14.5° had been when well-liked.
The height of the gear tooth is identified by the modulus (m).
Full tooth height h=two.25m (=tooth root top+tooth set top)
Tooth height (ha) is the top from the tooth idea to the index line. ha=1m
The tooth root peak (hf) is the peak from the tooth root peak to the index line. hf=one.25m
The basis of tooth thickness (s) is 50 % of the tooth pitch. s=πm/two
The parameter that establishes the dimension of the gear is the index circle diameter of the gear (d)
The pitch, tooth thickness, tooth height and tooth can be established primarily based on the index circle.
Prime height and tooth root top.
Index circle diameter d=zm
Addendum circle diameter da=d+2m
Tooth root circle diameter df=d-2.5m
The index circle can not be seen straight in the real equipment, because the index circle is an assumed circle to decide the size of the equipment
Packing & Supply